This item is old stock and has never been used.

Since we are selling it as a 3rd party the manufacturer's warranty does not carry over, but the item is covered by Falcon Restaurant Supply's 30-day limited warranty (see our warranty policy for details).

Some information from online:

The Southbend HDG-24 griddle uses natural gas and an electronic spark ignition to heat the U-shaped burners under the griddle plate. Each burner is spaced 12 inches apart, ensuring heat is evenly distributed. Because the sides are double insulated, heat is retained, and the unit is constructed of aluminized and stainless steel to resist corrosion and dents. Side and rear splashes contain messes, and liquid and food debris is sent to the grease drawer, which is removable to facilitate cleanup.

This unit has instant-on thermostatic controls that are adjustable with a knob, and the temperature settings on the knob are shown in numbers, ranging from 200 to 400 degrees Fahrenheit. To prevent overheating, the Southbend HDG-24 griddle has 4-inch-tall, adjustable legs that add stability on uneven surfaces. This griddle should be used under a vent hood, and it requires 12-inch clearances on the sides and an 8-inch clearance on the rear.

Product Details

• Stainless steel front, sides, and vent withstand constant use
• Stain-resistant, aluminized steel rear and bottom panels
• Reinforced, double-insulated sides retain heat
• 1-in.-thick griddle plate will not warp or bend
• Burners are spaced every 12 in.
• Griddle plate evenly distributes heat
• Instant-on thermostatic controls use numbers to show heat settings
• Temperature cooking range: 200-400 degrees F
• Embedded, load-sensing thermostat
• Runner tube for each burner
• 5-in.-tall rear and 4-in.-tall side splashes keep grease and food particles from getting on other surfaces
• Liquids are sent to the grease drawer to simplify cleanup
• Prevent overheating on the countertop with 4-in. legs
• Electronic spark ignition
• ³⁄₄-in. rear gas connection and pressure regulator
• Damage-resistant flue opening
• Protected exhaust vent
• Flame failure safety device
• Requires 12-in. clearance on sides and 8-in. clearance on rear
• Must be installed under a vent hood
• 60,000 BTU

Dimensions & Utilities

• 24 in. W x 31.75 in. D x 20 in. H
• Heated by natural gas