Turkaform Brush Modeling Liquid 250 ml

Usage Area and Features:

• Purpose: It is a modeling liquid with greater elasticity compared to Keranor and Universal.
• It allows easier and safer spreading, gathering, bending, and movement with a brush in anatomical forms.
• It can be easily used in both metal-free and metal-supported porcelain crown bridge works.
• It is specially designed for boutique laboratories that focus on artistic and aesthetic works.
• To distinguish it from other liquids, a small amount of red color is added.
• It does not flow during work, providing comfortable and enjoyable modeling in a paste-like consistency.
• It helps to create more aesthetic crowns by preserving the given anatomical form.
• It ensures that the porcelain powder mixture remains at the same consistency for a long time without drying out.
• After firing, it achieves completely natural colors without causing color deviation.
• If the recommendations are followed, minimum shrinkage rates are achieved after firing.
• It provides extremely sintered, pore-free, and durable porcelain.
• Compatible with every brand of porcelain powder.

Usage and Recommendations:

• Place the necessary amount of porcelain powder on your working glass.
• Drip Turkaform Brush Liquid onto your powder.
• Stir well until you reach the desired working consistency.
• If possible, use a glass spatula for mixing.
• Renew the washing water of the brush you use during work each time, preferably using distilled water.
• Wash and clean the brush sponge to remove excess water.
• During and after work, thoroughly absorb excess liquid with a paper towel, etc.
• Never vibrate as it will disrupt the natural arrangement of particles and evaporation gaps.
• If there is enough time after finishing your work, let large bridges stand on a paper towel, etc., for 1-2 minutes.
• Ensure the calibration settings of your oven. Store at room temperature (0-29°C). Do not refrigerate.
• Follow the recommended program to achieve the best results.

Starting Temperature: 500°C

Pre-Drying Time: 6 min

Vacuum Start: 500°C

Vacuum Finish: Equivalent to Max temperature

Packaging: 250 ml plastic containers