Universal Modeling Liquid 1000 ml

Usage Area:

• Purpose: It is a porcelain modeling liquid that can be easily used in metal-supported and metal-free porcelain crown bridge works where porcelain stacking can be easily performed.
• It is a more economical product compared to others. It offers a wide range of usage advantages with its ability to appeal to every season.

Features:

• It helps to easily shape the porcelain powder, providing enjoyable working conditions without flow and loss of shape in powders used in metal-supported crowns.
• It provides comfortable shaping by giving a paste-like feature to the porcelain powder.
• It ensures that the porcelain mixture remains at the desired consistency for a long time.
• After firing, no negative effects such as excessive shrinkage, cracking, or structural changes are observed.
• Compatible with every brand of porcelain powder.

Usage and Recommendations:

• Place the necessary amount of porcelain powder on your working glass.
• Drip Turkaform Brush Liquid onto your powder. Stir well until you reach the desired working consistency.
• If possible, use a glass spatula for mixing.
• Renew the washing water of the brush you use during work each time, preferably using distilled water.
• Wash and clean the brush sponge to remove excess water.
• During and after work, thoroughly absorb excess liquid with a paper towel, etc.
• Never vibrate as it will disrupt the natural arrangement of particles and evaporation gaps.
• If there is enough time after finishing your work, let large bridges stand on a paper towel, etc., for 1-2 minutes.
• Ensure the calibration settings of your oven.
• Store at room temperature (0-29°C). Do not refrigerate.
• Follow the recommended program to achieve the best results.

Starting Temperature: 500°C

Pre-Drying Time: 3 - 6 min

Vacuum Start: 500°C

Vacuum Finish: Equivalent to Max temperature

Packaging: 1000 ml plastic containers